REVERSE OSMOSIS PURIFICATION SYSTEM

R-TE-4007/10

Used to supply water with a high degree of purity, able to meet applications that require low levels of metals and dissolved salts and absence of microbiological contamination, being used in laboratories, to supply autoclaves, boilers, capillary cooling systems, cosmetics production, production of paints, supply of aquariums, among others. High-capacity membranes are used, which allow the production of purified water quickly, without wasting time.

Consult one of our specialist

Plastic housing material, robust polypropylene construction, for chemical resistance against most acids, alcohol, ammonia, oils and other aggressive chemicals
Withstand temperatures up to 50 ºC
Leak-proof “O” ring seal
Reinforced walls with ribs for added strength
Cartridges are resistant to bacteria, various chemicals, provide high particle retention capacity and extended life due to its large filtration area
High quality membranes for superior performance and long life
Hoses are made of low density linear non-toxic polyethylene. Depending on the manufacturer may be approved may be approved by FDA, SK, WRAS, ANSI, NSF-51, and others (indicate in consultation if necessary)
Pressure gauge with a liquid silicone bath dial, resistant to UV radiation from the sun's rays, to prevent the pointer from oscillating in case of pulsating pressures
Pressure gauge has double scale in psi and Kgf/cm2, stainless steel 304 body
Removes the entire range of contaminants from the water
Removes heavy metals such as barium, cadmium, chromium, lead, mercury, radium 226/228, selenium, chlorine, salts, cysts, bacteria, viruses, turbidity and more.

Purification sequence: :
- Polypropylene filter: capacity to retain particles of up to 5 microns from raw water
- Activated carbon filter: has the ability to retain chlorine, odors and others
- Reverse osmosis membrane: has microscopic pores for ultra filtration, has the ability to retain heavy metals, chemical contaminants, viruses, bacteria, protozoa, algae and others
- Mixed resin filter: for demineralization (deionization) of water
- Pressurization: The system is pressurized to ensure the passage of water through the reverse osmosis membrane
Pressurization pump: Provides pressure above 3.5 bar
Water quality: Free from microorganisms and low in minerals and salts dissolved
Conductivity: Below 1.0 µS/cm considering an inlet water of 180 µS/cm
Yield: 10 liters/hour
Pump casing: In carbon steel with anti-corrosive treatment and electrostatic painting
Cabinet: In aluminum coated with electrostatic paint
Pump housing dimensions: W=110 x D=110 x H=300 mm
Dimensions: W=370 x W=180 x H=390 mm
Power: 30 Watts
Voltage: 220 Volts
ACCOMPANIES: - 01 tap adapter - 01 Filter replacement key - Instruction Manual with Warranty Term

Tecnal offers solutions in equipment for laboratories in various segments of activity, focused on the proper functioning of products, ease of use and high accuracy of results!