DIGESTOR BLOCK WITH TOUCH SCREEN RAMPS AND LANDERS
DIGESTOR BLOCK WITH TOUCH SCREEN RAMPS AND LANDERS
TE-041/25
Used to digest the most diverse types of samples, such as plants, food, rubber, among others, for later analysis of nitrogen / protein.
![](https://tecnal.com.br/storage/segment_images/acucar-etanol-min.png)
![](https://tecnal.com.br/storage/segment_images/alimentos-bebidas-min.png)
![](https://tecnal.com.br/storage/segment_images/ambiental-aguas-min.png)
![](https://tecnal.com.br/storage/segment_images/ciencia-plantas-min.png)
![](https://tecnal.com.br/storage/segment_images/farmaceuticas-cosmeticos-min.png)
![](https://tecnal.com.br/storage/segment_images/microbiologia-biotecnologia-min.png)
![](https://tecnal.com.br/storage/segment_images/petroquimica-min.png)
- Compact equipment
- User-friendly touch screen display
- It has date and time on the display
- It has Stand-by mode
- After starting the process, it takes place automatically, providing agility
- It can have 5 segments, therefore 5 ramps and 5 steps
- Allows control of the time that the sample must remain at a certain temperature (level)
- Allows control of acceptable temperature variation in the process
- The ramp, when well dimensioned, allows the temperature rise to be smooth, resulting in low overshoot and better temperature distribution across the block
- At the end of the fulfillment of the programmed segments there is a resource item called looping (cycles), it can be 0 to 10, providing agility
- Allows the jumper option, in which two thresholds with the same set point can be programmed, providing plateau with longer time
- At the end of the process there is the control option (remaining at constant temperature) or the end option, the client choice
- It has a controller box separate from the block, which can be left outside the hood, resulting in a longer useful life to the equipment for being more protected from acidic gases and vapors
- Possibility of adaptations according to the client needs, makes the equipment already of line a special equipment.
- Temperature: Ambient +7°C to 450°C
- Temperature Controller: FE15J Digital controller board with PID system and ramps and steps with 1 program divided into 5 segments (temperatures) selectable with a maximum of 5 ramps and 5 steps (if 5 temperatures are selected). Possibility of 10 cycle repetitions
- Selection of counting type: By time (counts the time regardless of temperature and obeys the programmed time) or by temperature (only starts counting if the system is within the programmed limit)
- Control selection after ramps and soaks: Turns off the control or controls at the last set point
- Operation screen: TOUCH SCREEN 4.3
- Sensor: J type with stainless spring
- Accuracy: ±1°C
- Uniformity: ±3°C
- Safety: Shielded resistance avoiding contact with sulfuric acid and type B circuit breaker
- Block: In die-cast aluminum with 45 mm hole depth
- Cabinet: Stainless steel 304
- Dimensions: W=320 x D=430 x H=330 mm
- Weight: 18 kg
- Power: 2200 Watts
- Voltage: 220 Volts
- ACCOMPANIES: - 01 gallery in 304 stainless steel - 01 digital temperature controller with ramps and soaks - 40 micro tubes in 90 ml borosilicate glass Ø25 x 250 mm - Instruction Manual with Warranty Term
![](https://tecnal.com.br/img/sub_grupos/tecnal.jpg)
Tecnal offers solutions in equipment for laboratories in various segments of activity, focused on the proper functioning of products, ease of use and high accuracy of results!
![](https://tecnal.com.br/img/funcionario/central.vendas.jpg)
Tecnal
vendas@tecnal.com.br
vendas@tecnal.com.br