CLIMATIC CHAMBER FOR STABILITY TEST
CLIMATIC CHAMBER FOR STABILITY TEST
TE-4005
Used for tests with temperature and humidity control, such as shelf life (SHELF-LIFE) tests in food, beverage and ingredients for determining the shelf life of products and durability, stability and quality tests applied for pharmaceuticals, cosmetics, electronics, automotive components, etc.
Sugar & Ethanol
Food, Beverage & Animal Nutrition
Environmental, Waters & Effluents
Plant & Soil Science
Pharmaceutical & Cosmetics
Microbiology & Biotechnology
Chemistry & Petrochemicals
- Developed for accelerated and moderate stability testing
- Large internal volume, providing accommodation of large number of samples
- Versatility of sample sizes, due to the flexibility in handling the trays
- Internal glass door for sample viewing without loss of internal temperature and humidity
- Optional: CO2 module
- Presence of side compartment for easy access and verification with external sensors
- Microprocessed controller with PID control system, which provides more precise and stable control, being the final temperature reached more quickly and homogeneously
- Vaisala Intercap Sensor, of excellent quality and adapted to extreme conditions
- Two doors: facilitate use in smaller accommodation spaces
- Vat dyes and trays in 304 stainless steel, for longer service life and easy asepsis
- Easy mobility, due to the system of wheels by swivel casters for ease
- Safety system in the boiler in case of lack of water
- Safety system against freezing and overheating
- NR10 standard panel
- Armored resistance in stainless steel 304 ensuring safety and durability
- Strict quality control, in which checks and tests guarantee the perfect operation of equipment, providing safety and customer satisfaction.
- Temperature Range: 20°C to 50°C
- Control type: digital microprocessed
- Controller: Coel KM5P
- Controller reading accuracy: ±0.1°C
- Display: LCD
- Sensor: Vaisala HMP60
- Sensor reading accuracy: ±0.6°C
- Control accuracy: ±0.5°C
- Uniformity: ±2°C
- Heating: finned resistors in stainless steel 304
- Heating power: 2400W
- Cooling: airtight Compressor 1 / 2Hp+
- Gas type: R134A
- Cooling power: 1739 Kcal/h at 7.2°C
- Remark: control on resistance by PWM
- Humidity Range: 40% to 90%
- Control type: digital microprocessed
- Controller: KM5P
- Controller reading accuracy: 0.1°C
- Display: LCD
- Sensor: Vaisala HMP60
- Sensor reading accuracy: ±2%
- Control accuracy: ±1.0%
- Uniformity: ±5%
- Humidification type: by boile
- Remark: humidity control by PWM
- Circulation type: forced air
- Fan: Wellington ECF2
- Quantity: 2
- Fan power: 20.5 W
- Protection grade: IP67
- Operating temperature: -30°C to 50°C
- Flow rate: 500m3 / h at 0Pa
- Insulation Class: A (105°C)
- Type of supply / material: water from purification system (ten 4008) - quoted separately
- Actuator: solenoid valve
- Sensors: Key Type Float Hammer
- Automatic: Yes
- Level control: via electrical panel of the machine
- Notes: corresponding description of humidification system
- Ambient temperature: 12°C to 25°C
- Minimum and maximum humidity: 30 to 90% UR without condensation
- Notes: leave a distance of at least 0.5 m from the sides to the wall and equipment
- Trays: 5 trays in stainless steel 304 #1,5 with spacing of 250mm
- Capacity: 32kg / each evenly distributed
- Notes: approximate dimensions of 990x600x30 (mm) - Wxdxh
- Total proofs per tray: 40 proofs
- Door / cover: carbon steel
- Inner Material: stainless steel 304
- External Material: carbon steel
- Insulation: EPS
- Painting: electrostatic powder
- Finish: Textured
- Sealing: molded rubber with magnet
- External door: 2 doors with magnetic lock
- Inner door: tempered glass
- Notes: each door has a glass bottom door for sample viewing without temperature/humidity loss
- Dimensions of equipment *
- External (mm): 1925 x 1730 x 1400 (H x w x d)
- Internal (mm): 1500 x 1000 x 800 (H x w x d
- Internal Volume: 1200 liters
- Internal useful Volume: 1000 liters
- Weight *
- Total weight: about 300kg, no load
- Electrical data *
- Total power: 4000W
- Supply voltage: two-phase 220 VAC
- Frequency: 60Hz
- Allowable network fluctuation: ±5%
- Grounding: less than 10 Ohm
- Plug type: Scame 2p + T 32A / 250VAC 6H 213.3233
- Notes: overlap socket should be installed on the wall for a connection distance of 1.5 m with standard medium socket (0.5 m to 0.9 m from the floor)
- Data acquisition *
- Instrument: Novus Fieldlogge
- Sampling: 1 min
- Communication: USB HOS
- Memory: 16G
- Physical output: USB (data) on the main panel. Starts collecting data when inserting The Flash Drive
- Notes: the logger came out programmed with sampling of 1 in 1 min. The reading variables (data) are, temperature, humidity
- Alarms and security *
- Safety mechanical actuator: bulb thermostat
- Function: freeze and Overheat Protection
- Notes: there are two actuators, one for Can and one for low temperature
- Applications: Test of samples under temperatures, humidity according to test metrology in products to determine the shelf life of the sample, i.e. stability test
- Optional: Performance qualification Operation qualification Installation qualification
- Tracking *
- Documents: instruction Manual
- Components: electrical panel UniKey key
- Notes: - The moisture system must always work with water from the osmosis system RTE 4008 not included. The product must be purchased the part
Anderson Luiz dos Santos
anderson.santos@tecnal.com.br
anderson.santos@tecnal.com.br
